PQ-Box 150/200/300

Mobile Power Quality Analyzers

The A-eberle PQ-Box Mobile Type Energy Analyzer family is equipped with many different trigger options to make easier for detect the source of all events occurring in the network, allowing to get the most from a power quality measurement.

A-eberle allows users to be minimally affected by environmental factors with IP65 protection class and an internal battery that provides continuous measurement up to 6 hours in case of any power supply failures.

The simple interface of the “WinPQ Mobile” software, which analyzes and analyzes the power quality parameters recorded with high precision during the continuous measurement, is not lost between big data stacks thanks to the categorical success and easy-to-understand analysis options, and you only get the information you need.

1JK
2

PQ-Box 150

PQ-Box 150 is a high-performance, portable network-analyzer, power meter and transient recorder. User-friendliness was one of the main topics during development.

The mobile device has been developed for mobile operation (protection degree IP65). It is applicable for measurements in public networks (600V CAT IV) as well as for measurements in industrial environment up to 1000V measurement voltage.

  • A Class / CAT IV
  • Powerful features for analyzing network events
  • Load analysis and energy measurements
  • 20,48 kHz sampling frequency
  • Up to 32 GB memory (4 GB as standard)
  • Evaluation of voltage quality according to EN50160 and IEC-61000-2-2 / 2-4 standards

Data Sheet
User Manual

PQ-Box 200

PQ-Box 200 is a high-performance, portable Class A network-analyzer, power meter and transient recorder. User-friendliness was one of the main topics during development.

The mobile device has been developed for mobile operation (protection degree IP65). It is applicable for measurements in public networks (CAT IV) as well as for measurements in industrial environment up to 1000V measurement voltage.

  • Load analysis and energy measurements
  • Option: Transient measuring card 2 MHz ( + / – 5.000V range)
  • 40,96 kHZ sampling frequency
  • FFT calculation up to 20 kHz
  • Up to 32 GB memory (4 GB as standard)
  • Up to 6 hours of battery operation
  • IP 65 Class / Water and dust resistance
  • Evaluation of voltage quality according to EN50160 and IEC-61000-2-2 / 2-4 standards

Data Sheet
User Manual

PQ-Box 300

PQ-Box 300 is a high-performance portable network- and frequency-analyzer, power meter and transient recorder in a single device. Usability was the focus of the development.

The device records permanently and continuously frequencies up to 170 kHz. The mobile device has been developed for mobile operation (protection degree IP65). It is applicable for measurements in public networks (CAT IV) as well as for measurements in industrial environment up to 1000V measurement voltage.

  • Frequency analysis from DC to 170kHz with continuous recording
  • Transient event recording up to 4MHz
  • Up to 32 GB memory (8 GB as standard)
  • Reporting to EN50160 and IEC61000-2-2 / -2-4 standards
  • Wireless parameterization with Android-based mobile phones
  • Load analysis and energy measurements
  • Online FFT spectrum representation
  • Parameter can be 10 ms RMS and oscilloscope recording
  • IP 65 Class / Water and dust resistance
  • Online data monitoring

Data Sheet
User Manual

Accessories

null

Rogowski coil set CAT IV 600V

  • Current range: 1 A – 3000 A RMS
  • Frequency range: 10 Hz – 20 kHz
  • Accuracy: 1%
  • Size: 61 cm (24 “)
  • Diameter: 194 mm
  • Set of 4 pieces
null

Rogowski coil set CAT IV 600V

  • Current range: 1 A – 6000 A RMS
  • Frequency range: 10 Hz – 20 kHz
  • Accuracy: 1%
  • Size: 91 cm ( 36“ )
  • Diameter: 290 mm
  • Set of 4 pieces
null

Rogowski coil set CAT IV 600V

  • Current range: 1 A – 3000 A RMS
  • Frequency range: 10 Hz – 20 kHz
  • Accuracy: 1%
  • Size: 60 cm ( 24“ )
  • Diameter: 190 mm
  • Set of 4 pieces
null

Rogowski coil set CAT IV 600V

  • Current range: 1 A – 500 A RMS
  • Frequency range: 10 Hz – 50 kHz
  • Accuracy: 1%
  • Size: 22 cm (9“)
  • Diameter: 70 mm
  • Set of 4 pieces
null

Current clamp 4 probes CAT III 600V00V

  • Set of 4 pieces(high precision – low angle error)
  • Switchable measurement range: 0 A – 20 A – 200 A
  • İnner diameter: 15 mm
  • MU-Metal clamp with two switchable measurement ranges
null

Rogowski coil set CAT IV 600V

  • Current range: 1 A – 1500 A RMS
  • Frequency range: 10 Hz – 20 kHz
  • Accuracy: 1%
  • Size: 40 cm (16 “)
  • Diameter: 127 mm
  • Set of 4 pieces